The Future Of Lath
We at Flex-C-Ment recommend SpiderLath to all of our clients and many different scenarios of application to ensure that our product always has the best opportunity to perform at its highest level and by using SpiderLath our clients will always have the comfort of knowing that they are using the utmost top quality lathing materials for their applications.
Along with great product offerings from SpiderLath, their employees and customer service have been second to none when needing any technical and installation advice while using any of their various lines. Flex-C-Ment has been very happy with everything involved with SpiderLath’s Company and products and will continue to promote the usage of these products at any time. Thank you for everything that you do for our industry,
Gregg Hensley-National Sales and Marketing Manager FLEX-C-MENT
“This is a Great Product. Unbeatable and Very Believable Product. Thanks Spider Lath $$.”
Adan Gutierrez III, President
Masonry Applicator, A. Bricklayers Company LLC., 361-580-0036
My name is Paul from Western Michigan University concrete canoe team. You sent us a sample of your product SpiderLath and we love it! It is a far better product then any other mesh we’ve tested. We would really like to use it as reinforcement in our concrete canoe. We will also send you more pictures we actually build the canoe. Thanks again for your help and we love your product. Click for photos.
“I save OVER 50% on my installation labor costs when I use SpiderLath! The ease of installation is unbelieveable and a lot safer than the old metal lath. I will only recommend and use SpiderLath!”
Jay Harvester, NW Mfg Stone.
I loved working with your product, first introduced by Vertical Artisans, and I’ll continue to use it in the future. Keep up the great work and keep me informed of new products and or suppliers.
Bob – Restoration Colllaborative llc.
We do a lot of stucco applications on chimneys and ICF walls and veneer stone applications that all require galvanized wire mesh to attach the stucco or thin set to the substrate. This stuff is very unpleasant to work with and can lead to moisture migration into the wall. SpiderLath is a fiberglass lathe with rubber gaskets that you nail through to attach it to the wall so you will not have leaks through the fastener penetration and it comes in a 4’ x 75’ light weight roll that is very easy to work with and corrosion proof. It solves a difficult problem in a very elegant way.
Michael, Chandler Design Build
(customer of Kuhlman Corp., Toledo, Ohio) applying SpiderLath for the first time. Following are some of the comments from Dan and his assistant as they worked with SpiderLath.
“Cuts like butter. No sharp edges. Nails up nice and quick”
“Far less cutting and less pieces to deal with.”
“Easier to trowel over than metal lath.”
“Simple to trim around windows and make cuts for electrical wiring.”
“Takes mortar better along the edge.”
“Metal lath tends to vibrate on the edges and makes it difficult for mortar to hang on it.”
“We don’t have to figure which way is up or down on the lath.”
“I really like your product it’s been working very well, thanks a lot for you help. Our workers like working with the much lighter, easier to use material as well. They’re not getting any cuts on their hands from the metal and it’s much, much easier to cut. So i just thought i’d say thanks, and that i’m happy the wait is over. I was getting really tired of the metal.”
John, Quarry Stone Ltd.